Step 1: create the exact paper size
- Open Windows printer properties and find the custom paper size section.
- Measure the physical form, for example 241 mm wide by 140 mm high.
- Create the size with a clear name such as “3-part 241×140”.
- Set it as the default for that printer.
- Print a Windows test page to confirm the driver accepts it.
Do not choose a nearby standard size. A few millimetres of difference accumulates across three copies.
Step 2: configure copy labels and fields
- Copy 1: file or shop, with internal reference.
- Copy 2: customer, with payment terms and contact details.
- Copy 3: accounts or warehouse, with picking notes.
- Ensure document number, date, customer and total appear on every copy.
- Keep the logo small and monochrome for impact printing.
Step 3: calibrate with plain paper
Print on plain paper first. Hold it against the form and check vertical offset, horizontal offset and scale. Adjust one margin at a time by 1–2 mm. If the scale is wrong, the paper size is wrong, not the margin.
- Top margin: moves the whole layout up or down.
- Left margin: shifts columns horizontally.
- Row height: changes how many lines fit on the page.
- Footer position: keeps totals and signatures on the form.
Step 4: load carbonless paper correctly
Carbonless paper has a coated side. If it is reversed, copies two and three will be faint or blank. Check the package instructions and the printer manual for the correct direction.
- Fan the stack before loading to avoid double feeds.
- Set the paper thickness lever for multi-part stock.
- Use a fresh ribbon and moderate print density.
- Slow the printer if copies are uneven.
Troubleshooting after go-live
| Symptom | Check first |
|---|---|
| Layout shifted after a driver update | Custom paper size was reset |
| Third copy unreadable | Ribbon, print head, paper direction |
| Totals on a second page | Lines per page or row height too large |
| Columns cut on the right | Template width exceeds printable area |
| Every print needs adjustment | Template not saved as default |
Frequently asked questions
Can a laser printer produce 3-part forms?
Only one copy per sheet. Three carbonless copies in one pass require an impact printer and multi-part paper.
Why does the layout shift after a Windows update?
Driver updates can reset custom paper sizes. Recreate the size and reselect it in the template.
How do I make copies darker?
Replace the ribbon, check paper direction, then increase print density. Do not set density to maximum immediately; it can smear.
Should each form size have its own template?
Yes. Keep a separate template per paper size and printer so switching paper does not require recalibration.