Alignment problems
If the print is consistently shifted, the paper size or margin is wrong. If it shifts only on some sheets, the paper feed is slipping or the form is not aligned in the tray.
- Create the exact custom paper size in the driver.
- Adjust the top margin first, then the left margin.
- Check that the form is square in the tray.
- Do not scale the template to fit a nearby standard size.
Faint second copies
| Cause | Fix |
|---|---|
| Worn ribbon | Replace the ribbon |
| Carbonless paper reversed | Check coated side direction |
| Low print density | Increase density moderately |
| Worn print head | Service or replace the printer |
| Paper too thick | Adjust the thickness lever |
Columns cut off or totals on a new page
Right-side columns are cut when the template is wider than the printable area. Reduce column widths or margins rather than shrinking the font below legibility. If totals spill onto a second page, reduce the number of lines per page or the row height.
- Test with your longest product name and largest amount.
- Set a fixed number of lines per page.
- Repeat the header when a document spans pages.
A five-minute troubleshooting checklist
- Print a Windows test page.
- Confirm the custom paper size and default printer.
- Print a plain-paper test from the software.
- Compare with the physical form and adjust one margin.
- Print one real 2-part form and check both copies.
Frequently asked questions
Why is only the first copy clear?
Check the ribbon, print density and carbonless paper direction. A worn ribbon is the most common cause.
Can I print 2-part forms on A4 paper?
You can print an A4 invoice, but two carbonless copies require multi-part paper and an impact printer.
Why do totals move to page two?
The template fits too many rows or uses a row height that is too large. Reduce rows per page and check the footer position.
Should I use one template for all printers?
No. Create a template per paper size and printer, and bind the default printer to the template.